
request A slab leak detection service

A rising water bill with no visible leak, a warm patch on your flooring, or the faint sound of running water when every fixture is off — these are the early signs of a slab leak, and in Temecula's older neighborhoods with copper supply lines running through the foundation, they're more common than most homeowners realize.
The problem with a slab leak isn't just the water — it's that guessing at the source means breaking concrete in the wrong spot, which turns a plumbing repair into a much bigger, much more expensive project. Before Pro Team Plumbing, Heating & Air breaks any concrete, we locate the exact point of the leak using dedicated detection equipment, so the eventual repair is targeted, fast, and doesn't tear up more of your home than necessary.
Our Slab Leak Detection Process
We follow a consistent diagnostic sequence so we can point to the leak's location with confidence before any concrete is opened.
Initial Assessment & System Isolation: We start by checking your water meter for movement with fixtures off, and isolating the hot and cold lines separately to narrow down which line — and which section of your plumbing — is losing pressure.
Electronic & Acoustic Detection: Using electronic listening equipment, we trace the sound of escaping water through your slab and flooring to narrow the leak to a specific area, rather than an entire room.
Pressure Testing: We isolate suspect sections of pipe and pressure-test them to confirm which line is compromised and rule out fixtures or connections above the slab as the source.
Thermal Imaging Confirmation (where applicable): For hot-water line leaks, we can use thermal imaging to visually confirm a heat signature at the leak point, cross-checking what the acoustic equipment found.
Marking & Reporting: Once the leak is pinpointed, we mark the exact location and walk you through what we found, what caused it, and what the repair will involve — before any demolition begins.

Why a Precise Diagnosis Matters Before Anyone Touches the Slab
Not every slab leak requires jackhammering a large section of your foundation. Once we've confirmed the exact leak location, there's often more than one way to address it — a spot repair at the pinpointed location, or in some cases a reroute that moves the line above the slab entirely, avoiding the concrete altogether. The right approach depends on the age and condition of the surrounding pipe, whether it's an isolated pinhole leak or a sign of broader corrosion in the line, and how accessible the location is. Skipping detection and repairing based on a guess risks opening the wrong section of slab, missing the actual leak, and leaving the underlying problem to resurface. That's why detection and repair are treated as two distinct steps in our process, not one rushed job.
Why Choose Pro Team for Slab Leak Detection
We Find the Leak
Not Just the Symptom A wet spot on the floor tells you water is present, not where it's coming from. Our detection equipment traces the actual source, so you're not paying to open concrete in three places before finding the right one.
We Catch Related Problems in the Same Visit
Visit Sometimes what looks like a slab leak is actually a sewer line issue pushing moisture up through the foundation. If our detection process points toward the sewer line rather than a supply line, we can move directly into a sewer camera inspection to confirm it before any concrete work starts.
We Confirm the Line Before We Recommend a Fix
If detection reveals a single pinhole leak in an otherwise sound line, a spot repair may be all that's needed. But if we find signs of widespread corrosion consistent with an aging copper system, we'll walk you through whether our repiping service makes more sense long-term than repeated slab repairs.
One Team, From Detection Through Repair
Once we've located the leak, our slab leak repair team can take over the fix directly — no separate company, no re-explaining the problem, no second service call.

Slab Leak Detection for Commercial Properties
For commercial properties on a slab foundation — retail spaces, restaurants, and multi-unit buildings — a slab leak can mean unexplained utility costs or flooring damage that affects daily operations. We approach commercial slab leak detection with the same non-invasive methods, working around your business hours where possible to minimize disruption while we locate the source.

Slab Leak Detection Serving Temecula, Murrieta, Menifee,
Wildomar & Lake Elsinore
Pro Team proudly provides slab leak detection throughout Southwest Riverside County, including:
THE PRO TEAM STANDARD
We're not just another home service company, we're a team of skilled professionals who take pride in every job. From the tools we use to the way we treat your home. We hold ourselves to a higher standard so you can count on lasting results
PROFESSIONAL, RELIABLE, RESPECTFUL.
TOP QUALITY WORKMANSHIP
YOUR SATISFACTION, GUARANTEED

TRUSTED BY LOCAL HOMEOWNERS
FREQUENTLY ASKED QUESTIONS
Don't Guess Where the Leak Is — Find Out Today
A slab leak doesn't get better on its own, and guessing at its location only adds cost and damage. Get a precise, non-invasive diagnosis from a licensed Temecula plumber. Call Pro Team Plumbing, Heating & Air at (951) 232-4487 or request slab leak detection now.


